YYW-2 0-1024℃ Temperature Sensor Temperature Control Relay Detection High Temperature Serial Output with K Type Thermocouple 30A
- Hassle-Free Warranty
- 30-Day Money-Back Guarantee
- Fast, Free Shipping
- Lifetime Customer Support
Description
Setting instructions:
-Add ms level delay time to prevent output oscillation and cause damage to the entire circuit.
-Can turn off the display for a long time, reducing power consumption
-Synchronous data acquisition serial output
Input supply voltage: DC 7 ~ 30V universal
Output controllable power: DC / AC within 30A
Probe model: K-type thermocouple Wire length 0.5M
Screw head specifications: M6
Resolution: 1 degree
Function Description:
(A and B are the values we can set by ourselves)
P--1: When the measurement is lower than the temperature value A, the relay is activated, and when the temperature is higher than the temperature value B, the relay is disconnected;
P--2: When the measurement is higher than the temperature value B, the relay is activated, and when the temperature is lower than the temperature value A, the relay is disconnected;
P--3: When the measured temperature is between A and B, the relay is turned off, and the relay is closed in other cases;
P--4: When the measured temperature is between A and B, the relay is closed, otherwise the relay is opened;
P--5: When the measured temperature is higher than the temperature value B, the relay is turned on, and the temperature is lower than the A relay is turned off;
P--6: When the measured temperature is higher than the temperature value A, the relay is activated; it is always activated; until the power is cut off manually
P--7: When the measured temperature is equal to A each time, the relay outputs a jog signal
Setting instructions:
Power-on indicates that the measured temperature enters the standby state;
Press K1 for the first time (it takes more than 1 second to be effective to prevent false triggering), the screen flashes: P --1: K2 plus mode, K3 minus mode
Press K1 a second time, the screen flashes: A025 means: A = 25 degrees: K2 and K3 adjust A
Press K1 a third time, the screen flashes: B035 indicates: B = 35 degrees: K2 and K3 adjust B
Press K1 for the fourth time, the display shows the measured real-time temperature indicating that it has entered the standby state;
Press K4 in standby mode to permanently turn off / on the display and switch the low power consumption mode.
1 x YYW-2 0-1024 ℃ Temperature Sensor Module
1 x K Type Thermocouple Sensor Cable
YYW-2 0-1024℃ Temperature Sensor Temperature Control Relay Detection High Temperature Serial Output with K Type Thermocouple 30A
$19.99