PORTXVNSA 4 inch IPS LCD SA5 Multi-function Handheld Spectrum Analyzer 100k-5.3GHz Signal Generator

>>>MANUAL: Click here to open<<<

SA5 Product Features:

Screen Size: 4 inches IPS LCD, featuring a large knob for easy operation.

Spectrum Analyzer: Normal mode：0.1-800MHz, Ultra mode：provides level calibration up to 5.3GHz, and can observe signals up to 12GHz.

Signal Generator: Outputs sine waves between 0.1-800MHz, square waves up to 4.4GHz, or RF test signals up to 5.3GHz when not used as a spectrum analyzer.

Switchable resolution bandpass filters: from 200Hz to 850kHz.

Optional LNA: Built-in 20dB Low Noise Amplifier (LNA).

Spectrum Display: Display up to 450 points, Display four independently configured trace

Storage: MicroSD card slot for storing measurements, settings, and screen captures(SD card Not includes).

Input Attenuator: Step attenuator adjustable from 0dB to 31dB (not usable with LNA).

Calibration: Includes a built-in calibration signal generator for automatic self-test and input calibration.

PC Connectivity: Connects via USB to function as a PC-controlled spectrum analyzer or signal generator.

Battery: 5000mA, Rechargeable battery providing at least 10 hours of portable use.

Max Input Level: +10dBm. Ensure not to exceed this to avoid damage.

Specifications:

Specification

Details

Input Frequency Range

100kHz to 800MHz in normal mode; up to 6GHz with ULTRA mode enabled

Input Impedance

50 ohm when input attenuation set to 10dB or more

Input Attenuation

Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active

Maximum DC Input

±5V DC

Absolute Maximum Input Level

+6dBm with 0dB internal attenuation

Absolute Maximum Short-Term Peak Input Power

+20dBm with 30dB internal attenuation

Suggested Maximum Input Power

+0dBm with internal attenuation in automatic mode

Best Measurement Input Power

Below -25dBm

Input Intercept Point (IIP3)

+15dBm with 0dB internal attenuation

1dB Compression Point

-1dBm with 0dB internal attenuation

Power Detector Resolution

0.5dB

Linearity vs Frequency

±2dB below 5.3GHz, ±5dB between 5.3GHz and 6GHz

Absolute Power Level Accuracy

±2dB after power level calibration

Built-in Optional LNA

20dB LNA with Noise Figure of 5dB

Lowest Discernible Signal without LNA

-102dBm at 30MHz using a resolution bandwidth of 30kHz

Lowest Discernible Signal with LNA

-145dBm at 30MHz using a resolution bandwidth of 200Hz

Frequency Accuracy

Equal to the selected resolution bandwidth

Phase Noise

-108dB/Hz at 100kHz offsetand -115dB/Hz at 1MHz offset@ 30MHz

Spur-Free Dynamic Range

70dB when using a 30kHz resolution bandwidth

Resolution Filters

0.2, 1, 3, 10, 30, 100, 300, 600, and 850 kHz

On-Screen Resolution

51, 101, 145, 290, or 450 measurement points

Scanning Speed

Over 1000 points/second using largest resolution filters

Automatic Optimization of Scanning Points

Ensures coverage of the whole scan range regardless of the chosen resolution bandwidth

Spur Suppression Option

For assessing if certain signals are internally generated or actually present in the input signal

Headphone Output

For listening to the demodulated audio (AM only). Stereo connector only, high impedance is louder, short protected

Package includes:

1 x 100k-5.3GHz Signal Generator