RD6006/RD6006-W LED Switching Power Supply S-400W-48V/DC12V/24V/36V/60V 8.3A-33.3A Support Monitoring Transformer Lighting

Feature:

Note: This power supply can be used with Product ID: 1587151 (RD6006/RD6006-W)

,

S06A Case Product ID

1587330

(If you need to use with RD6006/RD6006-W, please select 60V)

Model: S-400-xx

Output power: 400W

Output voltage: DC12/24/36/48/60V (Optional)

Input voltage: 110V/220V AC

Ambient temperature: -10 ° C ~ +50 ° C

Adjustable voltage: ±10%

Product size: 215 x 115 x 50mm

Item

Technical Specifications

Output

DC voltage

12V

24V

36V

48V

60V

Rated current

33.3A

16.6A

11.1A

8.3A

6.6A

Rated power

399.6W

398.4W

399.6W

398.4W

396W

Ripple and noise ①

<150mV

<150mV

<240mV

<240mV

<240mV

Voltage accuracy

±1%

Output voltage adjustment range

±10%

Load Regulation

<±1.2%

<±1%

<±0.5%

<±0.5%

<±0.5%

Linear adjustment rate

<±1%

Input

Voltage range

90-132VAC/180-264VAC 47Hz~63Hz; 254VDC~370VDC

Efficiency (typical) ②

>82%

>84%

>86%

>86%

>86%

Working current

<5.2A 115VAC, <2.8A 230VAC

Electric shock

110VAC: 25A, 220VAC: 50A

Start, rise, hold time

200ms, 50ms, 20ms: 230VAC

Protection

Overload protection

105%-135% type: constant current output, +V0 falls to undervoltage point to cut off output, reset: power on again

Overvoltage protection

Turn off output when >=115%-145%

Undervoltage protection

Turn off output when <10%-45%

Short circuit protection

Close output

Over temperature protection

RTH3:>=65°C fan starts, <=55°C fan off, >=80°C off output (5V-15V)

RTH3:>=70°C fan starts, <=60°C fan off, >=85°C off output (18V-48V)

Environment

Working temperature, humidity

-10°C ~+50°C, 20% ~90%RH

Storage temperature, humidity

-20°C ~+85°C, 10%~95%RH

Safety

Withstand voltage

Input-Output: 1.5KVAC

Input - Enclosure: 1.5KVAC

Output - Enclosure: 0.5KVAC for 1 minute

Leakage current

Input-output <6mA at 1.5KVAC

Leakage current

Input-output <1.5mA at 220VAC

Isolation resistance

Input-output, input-housing, output-housing: 500VDC/100MΩ

Other

Size

215*115*50mm

Net reset / gross reset

874.1/936.3g

①Ripple and noise measurement method: Use a 12mm twisted pair cable, and the terminal should be connected with 0.1uF and 47uF capacitors in parallel and measure at 20MHz bandwidth.

②Efficiency is tested at an input voltage of 230VAC, rated load, and ambient temperature of 25°C.

Accuracy: Includes setting error, linear adjustment rate and load adjustment rate

Linear Rate Test Method: Test from low voltage to high voltage at rated load.

Load regulation test method: from 0% to 100% of rated load.

The startup time is measured in the cold start state. The fast and frequent switching machine may increase the startup time. When the operating altitude is higher than 2000M, the operating environment temperature should be reduced by 5°C/1000M.

Package includes:

1 x Power Supply

Note: Due to logistics reasons, the following problems may occur after you receive the goods (just like the picture), you can use your hand to adjust, that's ok, if you mind this, please stop buying.